The Auto Detailing Podcast Oct 8, 2025

Can You Polish a Ceramic Coated Car?

Annotations will appear as you listen

0:00

15:15

Term

ceramic coating

Ceramic coating is a special liquid that you put on a car's paint to protect it. It helps keep the car shiny and safe from dirt and scratches.

Term

tunnel car wash

A tunnel car wash is a place where you drive your car through a long tunnel that washes it automatically. It uses brushes and water to clean the outside of your car.

Term

spider webbing marks

Spider webbing marks are tiny scratches that look like spider webs on a car's paint. They can happen if you wash the car the wrong way or use rough materials.

Term

coated car

A coated car has a special layer on its paint that keeps it safe from scratches and dirt.

Part

bumper

The bumper is the part of the car at the front and back that helps protect it in case of a crash.

Term

polish

Polish is a special product that makes the car's paint shiny and helps fix small scratches.

Term

gloss boss

Gloss Boss is a product that makes your car's paint super shiny after you clean it.

Part

clay spots

Clay spots are rough areas on a car's paint that can be cleaned with a special clay bar. This helps make the paint smooth again.

Part

Cut and Finish Pad

The Cut and Finish Pad is a special pad used with polish to help make a car's paint look better. It helps remove scratches and gives a nice finish.

Part

Burgundy Pad

The Burgundy Pad is a type of polishing pad that helps make a car's paint shiny. It's used with polish to fix scratches and improve the finish.

LIVE

So can you actually polish a ceramic coated car

or are you completely removing the coating when you do that?

And this is a question that comes up all the time,

especially from people who have recently coated their car

and they're just totally afraid to touch it, right?

They're really paralyzed by it.

It's a big investment, either time or money investment

and they don't wanna mess it up clearly.

So the short answer I guess to this is yes.

You can polish a ceramic coated car,

but the reality is is anytime you introduce

any abrasion at all, you are either removing

or at best weakening the coated areas.

That's exactly why I tell my customers

who get their car ceramic coated when they also ask,

can I take it through a tunnel car wash?

I say, well, yeah, sure, you could do whatever you want.

Just know that all those brushes

and the heavy pH of those chemicals

are at best weakening the coating.

So don't expect to get the full life out of the coating

if you're gonna maintain it that way.

That's why I talk about having these types of conversations

before you even ceramic coated car at all.

But here's the thing too, when it comes to polishing,

I'll try to stay on topic

because that is the topic for this episode.

If you choose the right polish

and the right recoding strategy,

and that's what I wanna talk about today,

it's gonna save you a ton of frustration.

Obviously it's not ideal to polish a ceramic coating,

but things happen, you scratch your car,

you come up against a yellow parking pole,

you, someone hits you, whatever.

There's a million different things.

You go through the tunnel car wash

and your car starts looking bad.

You don't have the right car wash techniques

and you start getting spider webbing marks in your coating.

There's a bunch of different things that can happen

to make the car start to look unsightly.

And so again, that's where I think the right

kind of polish and recode strategy

can really save you a ton of time.

And actually, this is a perfect excuse for this,

that's one thing that I was considering

when I was actually developing the picture-perfect polish

and the reason why I did develop it the way that I did

is I had this in mind if we need to fix this ceramic coated

to a car because these are issues

that happen in the real world.

These are the issues that come through my shop.

Granted, I'm not detailing too many cars anymore

because the product brand has really taken just overwhelming.

It's overwhelming and it's completely taken over my life.

And so, but again, 16 years of detailing, I've learned a lot.

So I guess we should talk about two.

One thing that gets confusing is like polishing

versus compounding.

And so I use the term just polishing as a universal term

when I was working with Tom,

that was really one thing we talked about, like a polish.

It's just a better term for it.

But just know that when I talk about polishing,

I'm talking about compounding or polishing either one.

So we're talking about mechanical abrasion,

leveling the surface, whether the surface is the coating

or the clear coat, even if it's minor,

even if it's a light polish,

even if it's a heavy compound.

I'm just gonna refer to it as polishing

because that's the most simplest way to talk about it.

It gets very confusing when you start talking about compound

and all of what's the difference.

We can have that discussion, but not today, right?

So a ceramic coating is something

that is sitting on top of the clear coat.

So it bonds, it hardens,

but it's still a layer on top of the clear coat.

So when you introduce any abrasion,

you start removing that layer, or at least thinning that layer.

So it's not too dissimilar from waxes and sealants

and all that, it's a sacrificial layer

protecting your clear coat underneath that layer, right?

But anything, any type of abrasion

can take this down a notch, right?

It can slightly remove it.

And this kind of goes into my whole ethos of my whole brand,

everything from the super-super

to not have to touch the car as much.

It all comes back to not wearing down

the protection on your car,

being able to touch your car often to clean it,

to clean your car often to make sure you have a clean car

without running the risk of damaging anything.

And then when you do damage it,

which is what we're talking today,

you can polish it and recode it, no problem.

So no matter what brand of coating you're using too,

I think this goes without saying, but I will say it anyway.

No matter what brand of coating you're using,

whether it's a pro-only coating, spray-coating,

Tuva Shell, whatever, abrasion is abrasion, okay?

So if you've got a scratch, water spots,

which I've been talking about,

towel-marring, a light polish, a heavy compound,

it doesn't matter.

So you are removing the coating in that area, right?

So think about it, in real dramatic terms,

if you're sanding clear film, you can smooth it out,

but the clear coat is gone in that spot, right?

So the problem, what usually happens

is people totally panic, right?

They get a scratch, so they polish it,

they get water spots on their windshield,

they polish their windshield,

and then they realize that the water's not beating anymore,

the coating's not acting how the coating should act.

So now they have to recode it,

but then they wonder if they need to strip the whole car

and start over, and that's a big, big question that gets asked.

Hey, I messed up on this one panel,

I had water spots on these, my two doors,

and I removed them, I polished them,

but now do I need to recode my whole car, right?

And then this becomes a hassle,

turns into this long, stressful, drawn out process.

You fix one thing, you remove the scratch,

you remove the water spots, whatever,

but now you have to redo the coating,

the cure times, find the shade, get it inside,

take it back to the shop,

when I think in reality it just shouldn't be that complicated,

but the detailing industry is known

for over-complicating things, right?

So again, that's the exact pain point,

or one of the pain points that I was thinking about

when developing the Picture Perfect Polish.

So as well as all the other attributes of the polish, right?

It cuts, great cut, finishes down beautifully,

but one of the most important things was

it didn't leave a residue or film

that interfered with coatings,

and this is something that everywhere

the IPA wipe came from is because

we have two things going on at once.

We have people that want and brands

that develop products with really long work times,

which I think is really important,

but in order to get those really long work times

in the polishes or compounds, whatever,

they add a lot of oil to the formula,

but then what happens is even as you're buffing,

all that oil gets left on the surface

so that oil will interfere with the coating, right?

And so the tricky part was how do we get a product

that still has a long work time

but isn't gonna leave any oils or residue behind

that interfere with the coatings, right?

These oils, sometimes they're fillers,

but the main thing is that they prevent

the coating from bonding properly,

so you have to correct the panel,

then you cannot immediately coat it.

It'll be really weird and really slippery

and it's really difficult to explain without seeing it,

but it fights bonding, the coating is trying to bond,

but it can't because it has these oils in the way,

and so that's why brands recommend an IPA wipe, right?

So you remove, you polish it, you remove the oils,

and then you have a bare surface.

The problem is that sometimes when you hit it with the IPA

or the alcohol wipe or the panel prep,

whatever you wanna call it,

you run the risk of marring the surface,

you run the risk of seeing the true results

of what the polish is or isn't doing correction-wise,

and so you could think that you corrected the panel

only to panel wipe it with an alcohol or a panel prep

or something and it reveals a bunch of scratches

that you may have put in with the panel prep.

See the problem?

So I, on the other hand,

and what makes the picture perfect polish different

is I wanted something pure.

A one-step, true correction, finishes ready for coating.

That was a monumental task.

For something so simple, which is true in life,

usually simple things are actually very difficult,

you can literally polish and coat

the same panel minutes later.

You don't need heavy prep, you don't need the IPA wipe.

You can if you want to, and if you want to

see what the true surface is and how it's,

after you get done polishing with the picture perfect polish

and then you hit it with the IPA wipe,

you're gonna have the same looking surface.

It is a true correction.

You don't need to worry, let the product gas out

or anything like that.

So where this translates into the real world

is if you have a coated car and you do get a scratch

or need to touch up a panel,

maybe you get a car accident or something

and your bumper gets repainted, right?

It's, what I don't want it to be

is a weekend long project, right?

You polish that spot with the picture perfect polish,

wipe it, remove the residue and reapply the gloss boss

or whatever coating you're using, right?

Tough a shell, whatever, and you're done.

It's not difficult, it's very, very simple.

It was incredibly difficult and a ton of R&D hours

went into getting the picture perfect polish down to that

so it could be that simple.

And that's exactly what I wanted, but,

so to give some real life examples of things I've done

and how I've handled this in real life situations,

if it's like a little spot repair,

one small spot like a bird poop or scratch,

I just polish that area, recode that spot, done, right?

If it's an entire door or hood,

maybe it's looking really scratched up,

you go to the car wash, water spots, something like that,

I may work the entire door, the entire hood,

I'm definitely not gonna do like half a hood like this.

If it's really big scratch, I will do that whole panel,

whatever, like kind of seam to seam, edge to edge.

And again, it's just a polish and a recode, right?

If the whole car's contaminated

or has water spots over the whole entire car,

again, better off, you're in it for a full correction

and recode, it's basically starting from scratch.

But again, the same logic applies,

you are just polishing and coating.

So it doesn't, sometimes detailing is so over complicated

and sometimes we speak in absolutes,

like it has to be all or nothing,

you have to recode the whole entire panel or nothing,

but the reality is it doesn't have to be all or nothing,

the right polish, the right system

gives you the flexibility, right?

And that's what the Jimbo system is, it's just simple,

it's fast and it's effective.

So a lot of people ask me for a step-by-step,

so a real-world workflow, I guess,

of how I would practically handle this whole entire process.

If I had to correct and code a car today,

here's exactly how I do it and how I would do it.

I would wash it with the Super Soapers,

so I would pre-soak a completely dry car

with the Super Soapers using four ounces of soap

in my foam cannon.

I would use half the foam cannon on this dry car

to foam it completely, I would let that sit

for three to five minutes, I would rinse it,

and then I would completely,

I would use the second half of the foam cannon

to foam the car a second time,

and if the car was really dirty,

I may do a contact wash, but 90% of the time,

I'm not doing a contact wash after this.

That is going to completely clean the car for me.

If I needed to, I would maybe clay spots

that I knew were already rough, maybe not.

I would dry the car, inspect it,

and then hit the area with the Picture Perfect Polish

and the Cut and Finish Pad, the Burgundy Pad.

That's my favorite combo, that is the combo

that I notice works 99% of the time,

I don't even need the Finish Pad.

That's what I would do.

I would wipe that off with a clean microfiber towel,

the residue from the polish,

and then I would immediately recode it,

either a tough shell if it's spray coating

or the gloss boss for the wipe-on coating.

So again, this workflow, it's simple,

but it eliminates the need to overthink it.

It's quick, efficient, you know what you're getting,

proper bonding, and that is the key for anything.

So again, if you wanted to continue it out

for a whole panel and go scene to scene,

you totally can, but you definitely don't have to.

You can recode over an area that's coated,

so that's another option too,

like if you have a scratch in the middle of the door,

you could fix the scratch and then recode

the whole entire door.

You could do that as well if you wanted to,

but again, you can polish a ceramic coat of car,

but just know that polishing removes some

or all of the coating, so it's not a bad thing.

It just means you need to reapply,

and sometimes it's actually a better thing

to reapply a fresh layer of coating,

but again, this is why I built

the picture perfect polish the way I did,

so you can keep your car looking perfect

without dreading the maintenance.

Again, polishing is not my favorite part of detailing,

and so I looked to build something that didn't exist,

that fit my desire to not have to polish a car all day.

I wanna get a car done in a couple hours, right?

So I would love to hear though,

how you guys handle ceramic coated car corrections,

are you recoding the whole car?

Are you recommending that for customers?

Are you doing it?

Have you noticed changes in the hydrophobics

after correcting?

Have you been able to use a polish and not have to recode?

That would kinda be interesting too,

so if you wanna try the picture perfect polish

or the coating combo I talked about,

you can obviously grab them at jimbusdetailing.com

or on Amazon, as always, if you found this helpful,

hit subscribe, share this with someone

who's scared to touch their coated car.

And don't be scared to touch your coated car.

It's not magic sauce on your car, right?

It's very doable, it's easy to recode,

especially if you use something like the Gloss Boss.

It is definitely not something that you need

to be intimidated by, and it can be done.

So with that, thanks for listening,

thanks for watching, and I'll catch you guys

on the next one.

See ya.

About this episode

Polishing a ceramic coated car can be daunting for many owners, but it is possible without completely removing the coating. This episode delves into the nuances of polishing techniques, the importance of selecting the right products, and the balance between maintaining the coating and achieving a flawless finish. The host shares insights from 16 years of detailing experience, discusses the development of a new polish designed for easy application without residue, and offers practical workflows for correcting and recoding. Listeners will gain confidence in caring for their ceramic coatings.

bumper Burgundy Pad ceramic coating clay spots coated car Cut and Finish Pad Gloss Boss polish spider webbing marks tunnel car wash

Original notes

Can you actually polish a ceramic coated car, or does that completely remove the coating? In this episode, I break down the truth about polishing coated paint and why any abrasion — no matter how light — can affect or remove your ceramic coating, regardless of brand.

I'll also explain how this challenge led me to develop Picture Perfect Polish, a polish that finishes clean enough to apply a ceramic coating right over it without waiting hours or doing extra prep. That means if you ever need to correct a coated panel, fix a scratch, or spot-polish your paint, you can handle it fast and recoat immediately with The Gloss Boss or Tough As Shell.

By the end, you'll know exactly how to safely polish, correct, and re-coat your ceramic coated vehicle without turning it into a weekend-long project.

Products Mentioned:

Picture Perfect Polish: https://jimbosdetailing.com/products/picture-perfect-polish
The Gloss Boss Ceramic Coating: https://jimbosdetailing.com/products/the-gloss-boss
Shop all Jimbo's Detailing Products: https://jimbosdetailing.com or on Amazon: https://amzn.to/434f8CI

If you found this video helpful, hit subscribe and turn on notifications so you never miss another detailing tip or real-world car care discussion.

Leave a comment below with your experience correcting or polishing a coated car — I read every one.

The Auto Detailing Podcast

Jimbo Balaam interviews guest like Barry Meguiar, Jason Rose, Yvan Lacroix,

View classic page →

0:00

15:15