{"version":"1.0.0","episode":{"title":"Goldberg’s race fuel issue, his 1970 Trans Am track car and supercharging a farm truck.","url":"http://getcarcurious.com/episodes/goldberg-s-race-fuel-issue-his-1970-trans-am-track-car-and-supercharging-a-farm-truck","audioUrl":"https://pdrl.fm/b6740f/pscrb.fm/rss/p/mgln.ai/e/1385/injector.simplecastaudio.com/f087831d-3f1f-401d-a940-d781bc925bb0/episodes/2f1e9b0c-9a59-468c-b116-b9938f27e9a2/audio/128/default.mp3?aid=rss_feed&awCollectionId=f087831d-3f1f-401d-a940-d781bc925bb0&awEpisodeId=2f1e9b0c-9a59-468c-b116-b9938f27e9a2&feed=SBbml57i","description":"Visit BioPro+ and save $100\nFollow @motorator\nFollow @goldbergsgarage\nPresented by Bravago Beverages Hosted by Simplecast, an AdsWizz company. See pcm.adswizz.com for information about our collection and use of personal data for advertising."},"annotations":[{"startTime":83.4,"endTime":88.9,"type":"term","title":"detergents","url":"/glossary/detergents","quote":"It doesn't have the detergents and stuff in it. It doesn't have the stabilizers, the detergents, doesn't have any of that stuff that we get","canonicalId":"term:detergents","priority":0.9,"confidence":0.95,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Fuel detergents are additive chemicals that help keep injectors, carburetors, and intake passages cleaner by reducing deposit buildup. If a fuel lacks detergents, the engine can foul faster—especially in engines that see varied driving or long idle/storage periods.","simplifiedExplanation":"Detergents are additives in gas that help keep the engine clean. Without them, the engine can get gunkier over time, which can hurt how it runs."}},{"startTime":85.4,"endTime":88.9,"type":"term","title":"stabilizers","url":"/glossary/stabilizers","quote":"It doesn't have the stabilizers, the detergents, doesn't have any of that stuff that we get","canonicalId":"term:stabilizers","priority":0.9,"confidence":0.95,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Fuel stabilizers are additives designed to slow down fuel degradation during storage. Without stabilizers, gasoline can oxidize and form varnish/gum that causes hard starting, rough running, or fuel-system deposits after sitting.","simplifiedExplanation":"Fuel stabilizers are chemicals that help keep gasoline from going bad when it sits. Without them, the fuel can turn into sticky deposits and make the car run badly later."}},{"startTime":93.7,"endTime":101.6,"type":"term","title":"race fuel","url":"/glossary/race-fuel","quote":"I poured some fricking race fuel in the Cobra, and man, it did not like it, like, by no means. And it only sat there for probably, I don't know, two years?","canonicalId":"term:race-fuel","priority":0.9,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Race fuel is a higher-performance gasoline blend intended for motorsport use. It often has different additive packages and sometimes different volatility/energy characteristics than regular pump fuel, which can affect starting, idle quality, and long-term storage behavior.","simplifiedExplanation":"Race fuel is a special kind of gasoline made for racing. It can be formulated differently than normal gas, so a street car might run poorly on it or not behave the same over time."}},{"startTime":156.4,"endTime":162.2,"type":"brand","title":"Costco","url":"/glossary/costco","quote":"I remember years ago, there was a big change where Costco was really getting into the fuel thing and building out more gas stations, but their fuel was crap.","canonicalId":"brand:costco","priority":0.5,"confidence":0.85,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Costco is discussed as expanding into fuel retail by building more gas stations. The speaker’s anecdote suggests Costco’s early fuel quality was inconsistent, highlighting that “same pump” gasoline can still differ by supplier and additive package."}},{"startTime":165.44,"endTime":168.18,"type":"car","title":"Ford Mustang","url":"/cars/ford/mustang","image":"https://upload.wikimedia.org/wikipedia/commons/1/13/1966_Ford_Mustang_coupe_white_001.jpg","quote":"And I put it in a 65 Mustang and it ran like shit. And then at some point over the years, you know, this could be 20 years ago, I can't recall exactly.","canonicalId":"car:ford:mustang","priority":0.5,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"The speaker mentions putting Costco fuel into a 1965 Ford Mustang and says it ran poorly. This is a real-world example of how fuel formulation (including additives) can affect drivability, even in older carbureted or early fuel-system designs.","simplifiedExplanation":"They put a certain gas into a 1965 Ford Mustang and the car ran badly. It’s an example of how different gasoline blends can change how an older car behaves.","imageAttribution":"Hans-Jürgen Neubert (CC BY 4.0)"}},{"startTime":185.24,"endTime":219.2,"type":"term","title":"racing fuel","url":"/glossary/racing-fuel","quote":"Like we need to be, you know, the right tier fuel compete with everybody else... But yeah, it comes down to and light, your racing fuel, like light, heat, how you store it...","canonicalId":"term:racing-fuel","priority":0.9,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Racing fuel is a higher-performance gasoline blend formulated for motorsport use. It’s typically designed to resist knock, maintain consistent performance under heat, and tolerate storage/handling conditions better than some pump fuels.","simplifiedExplanation":"Racing fuel is special gas made for performance engines. It’s meant to burn more reliably when the engine is hot and working hard, so it doesn’t “knock” or lose power."}},{"startTime":236.0,"endTime":244.9,"type":"term","title":"carburetor","url":"/glossary/carburetor","quote":"And I mean, that carburetor doesn't like it and it throws so much futile in there that it's like a rush of really shitty whiskey or something.","canonicalId":"term:carburetor","priority":0.9,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A carburetor mixes air and fuel mechanically before it enters the engine. If the fuel blend is off (for example, from contamination or degraded fuel), carburetors can run poorly—leading to roughness, misfire, or heavy exhaust.","simplifiedExplanation":"A carburetor is the part that mixes fuel with air for the engine. If the fuel isn’t right, it can make the engine run rough or spit out bad combustion."}},{"startTime":597.2,"endTime":600.8,"type":"concept","title":"SEMA","url":"/glossary/sema","quote":"it was staged out front of SEMA. You and I were out there. And then you had a little accident with this little, yeah, I was at El Toro doing Optima","canonicalId":"concept:sema","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"SEMA (Specialty Equipment Market Association) is the major U.S. trade show for aftermarket parts and custom vehicles. Cars staged in front of SEMA are usually there to attract attention from builders, vendors, and media.","simplifiedExplanation":"SEMA is a huge car show focused on aftermarket parts and custom builds. If a car is staged around SEMA, it’s usually because it’s a big deal to the performance community."}},{"startTime":937.5,"endTime":946.6,"type":"term","title":"spacer","url":"/glossary/spacer","quote":"And so we were going to spacer, right? Because of the width of the wheel on one side. And we were going to spacer on the other side, you know, which you don't want to be doing that.","canonicalId":"term:spacer","priority":0.5,"confidence":0.88,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A wheel spacer is a thickness added between the wheel and hub to change wheel offset and track width. While it can correct fitment or stance, it can also create new issues (like stress on bearings/bolts) if used to mask a deeper alignment or suspension problem."}},{"startTime":1186.5,"endTime":1193.5,"type":"concept","title":"display engine","url":"/glossary/display-engine","quote":"You could just clean it up and have a display engine or, or even paint it before you rebuild it and just have a pretty cool display engine on it.","canonicalId":"concept:display-engine","priority":0.5,"confidence":0.86,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A “display engine” is an engine kept primarily for visual presentation rather than daily operation—often cleaned, painted, and assembled to look correct. This changes the goal from performance reliability to appearance, authenticity, and presentation in a garage or show setting.","simplifiedExplanation":"A “display engine” is an engine that’s kept mainly to look cool, not necessarily to drive the car. People clean it up and make it look nice for showing off."}},{"startTime":1194.7,"endTime":1199.1,"type":"term","title":"valve covers","url":"/glossary/valve-covers","quote":"There's a few things, you know, maybe change the valve covers if they're rusted or a little bit. Cause I saw a little bit of rust, I think in the photo.","canonicalId":"term:valve-covers","priority":0.5,"confidence":0.92,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Valve covers are the upper housings on an engine that protect the top of the cylinder head and keep oil in. They’re also a common cosmetic and restoration item because rust or damage is visible and can affect how the engine looks during a display build.","simplifiedExplanation":"Valve covers are the top covers on an engine that help keep oil inside. If they’re rusty, swapping or cleaning them can make the engine look a lot nicer."}},{"startTime":1215.4,"endTime":1219.7,"type":"concept","title":"period correct","url":"/glossary/period-correct","quote":"I mean, I'd love to make it completely period correct looking right now and have it as a, you know, a placard in the middle of the fricking garage.","canonicalId":"concept:period-correct","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"“Period correct” means making a car or engine look like it did during its original era—using the right appearance, finishes, and often parts. In restorations, it’s about authenticity rather than modern upgrades, especially for show or track-car aesthetics.","simplifiedExplanation":"“Period correct” means you try to make it look the way it would have back when it was new. It’s more about the right look and details than adding modern stuff."}},{"startTime":1226.3,"endTime":1233.4,"type":"term","title":"crate engine","url":"/glossary/crate-engine","quote":"I mean, I've got, you know, the 170 engine in a crate. You can't see it. Right. And so it'd be nice to have this as a display.","canonicalId":"term:crate-engine","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A crate engine is an engine sold pre-assembled (or remanufactured) and shipped ready for installation. Enthusiasts use them to simplify sourcing parts and reduce downtime, and they’re often discussed in the context of restoration or building a “display” setup.","simplifiedExplanation":"A crate engine is an engine you can buy and install without building it from scratch. It comes packaged like a kit, so it’s easier to get running again."}},{"startTime":1277.0,"endTime":1282.8,"type":"concept","title":"port the heads","url":"/glossary/port-the-heads","quote":"...am I going to rebuild it and we're going to port the heads? What are we going to do?","canonicalId":"concept:port-the-heads","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"“Porting the heads” means reshaping the inside passages of an engine’s cylinder heads to improve airflow. Better airflow can increase power, especially on performance builds where the engine is being rebuilt or tuned.","simplifiedExplanation":"Porting the heads is when a shop reshapes the inside openings in the engine’s head. The goal is to help air and fuel move through more easily so the engine can make more power."}},{"startTime":1328.2,"endTime":1331.0,"type":"concept","title":"machine work","url":"/glossary/machine-work","quote":"That usually requires some machine work too. You, you know, so you probably have that sent out, but.","canonicalId":"concept:machine-work","priority":0.5,"confidence":0.88,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Machine work is precision machining done by a shop to restore or prepare engine components to correct tolerances. For example, it can include boring/honing cylinders, resurfacing mating surfaces, and checking alignment.","simplifiedExplanation":"Machine work is when a machine shop uses precision tools to make engine parts fit correctly again. It’s often needed after tearing an engine down so everything seals and runs right."}},{"startTime":1518.2,"endTime":1522.3,"type":"term","title":"bedliner","url":"/glossary/bedliner","quote":"But this is the one that has like the, the bedliner all over it. You know, so it's, it's meant to, to be thrashed a little bit more.","canonicalId":"term:bedliner","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A bedliner is a protective coating or insert installed in a pickup’s cargo bed to prevent dents, scratches, and corrosion. It’s commonly used when the truck is expected to be used hard.","simplifiedExplanation":"A bedliner is a protective layer inside the truck bed. It helps keep the bed from getting damaged when you haul stuff or use the truck rough."}},{"startTime":1527.1,"endTime":1533.5,"type":"term","title":"PPF","url":"/glossary/ppf","quote":"you know, it's PPF and it's ceramic coated and it's, you know, like there's only so far you can take it.","canonicalId":"term:ppf","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"PPF (paint protection film) is a clear protective layer applied to a vehicle’s paint to help resist rock chips, scratches, and minor abrasions. Enthusiasts often use it on daily drivers or expensive paint jobs to preserve appearance.","simplifiedExplanation":"PPF is a clear protective film that you put on the paint. It helps protect the truck from small damage like rock chips and light scratches."}},{"startTime":1579.8,"endTime":1582.1,"type":"concept","title":"show truck","url":"/glossary/show-truck","quote":"When I bought this truck originally, it was a show truck. I swear to you, it was absolute.","canonicalId":"concept:show-truck","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A “show truck” is a vehicle built or maintained to look impressive—often with cosmetic details, clean presentation, and sometimes attention to fit/finish. The speaker contrasts that original show-focused setup with later destruction and use as a track/production prop.","simplifiedExplanation":"A “show truck” is basically a truck that’s meant to look great, like for events or photos. Later, they used it for something rougher where looks mattered less."}},{"startTime":1758.0,"endTime":1762.9,"type":"term","title":"body panels","url":"/glossary/body-panels","quote":"...you're not worried about like, oh, that I just cave in like an original door piece because we've done body panels on the car. We're not too worried about the fitment of things...","canonicalId":"term:body-panels","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Body panels are the exterior sheet-metal or composite parts that form the car’s outer surfaces (doors, fenders, quarter panels, etc.). In a track-focused build, replacing body panels is often part of the normal repair cycle after impacts."}},{"startTime":1814.3,"endTime":1816.5,"type":"term","title":"weak links","url":"/glossary/weak-links","quote":"...you got to do a couple of the weak links on it.","canonicalId":"term:weak-links","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"“Weak links” are the components in a drivetrain or system that are most likely to fail first under increased power, heat, or stress. Performance builders often identify these parts and upgrade them proactively to avoid breakage.","simplifiedExplanation":"“Weak links” are the parts that can’t handle the extra stress. When you make a vehicle faster, those parts may break first unless you upgrade them."}},{"startTime":2124.64,"endTime":2126.9,"type":"concept","title":"NHRA","url":"/glossary/nhra","quote":"NHRA, the Winter Nationals.\nSo I'm going to head out Sunday to Pomona.","canonicalId":"concept:nhra","priority":0.9,"confidence":0.95,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"NHRA stands for National Hot Rod Association, the major U.S. drag racing sanctioning body. When someone mentions an NHRA event, they’re usually talking about organized drag racing classes, rules, and timing/tech procedures.","simplifiedExplanation":"NHRA is the big organization that runs drag races in the U.S. If you hear NHRA, it usually means a real, official drag-racing event with set rules and categories."}},{"startTime":2285.7,"endTime":2296.1,"type":"brand","title":"Porsche","url":"/glossary/porsche","quote":"It's crazy. ... It's, it's no secret what Porsche is, you know, the attention Porsche has been getting the past, you know, I want to say several years, but maybe a little longer than that.","canonicalId":"brand:porsche","priority":0.9,"confidence":0.95,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"The speaker is talking about Porsche’s recent rise in attention and how the brand’s approach to customization has changed. That shift helped Porsche become more visible in enthusiast culture and show scenes.","simplifiedExplanation":"They’re talking about Porsche and why people have been paying so much attention to the brand. The idea is that Porsche started allowing more personalization, which made more fans and builds show up."}},{"startTime":2297.5,"endTime":2323.7,"type":"concept","title":"customization","url":"/glossary/customization","quote":"I think what it is, is, is when Porsche started to embrace the customization, the personalization of the cars, not, not just, you know, like instead of going, we make a Porsche 911, you know, you shouldn't touch it.","canonicalId":"concept:customization","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Customization here refers to allowing owners to personalize their cars beyond factory configuration. In the Porsche context, the speaker argues that embracing modified builds helped the brand connect with the enthusiast community."}},{"startTime":2366.6,"endTime":2369.3,"type":"concept","title":"computer access","quote":"... because Dodge was like, you can't get into our computer.","canonicalId":"concept:computer-access","priority":0.2,"confidence":0.6,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"“You can’t get into our computer” implies restrictions on the vehicle’s electronic control systems, which can limit tuning and aftermarket development. In modern cars, access to the ECU/vehicle software is often a key factor in how easily owners can modify performance and features.","simplifiedExplanation":"The speaker is talking about whether people can access the car’s computer to tune or change things. If a brand restricts that, it can make modifications harder for shops and owners."}},{"startTime":2387.2,"endTime":2395.5,"type":"brand","title":"Dodge","url":"/glossary/dodge","quote":"but like once you turned it into a commercial business, it was frowned upon by Dodge. So until Dodge finally embraced it and said, we, we were back.","canonicalId":"brand:dodge","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Dodge is the automaker behind the Charger and Challenger, and the speaker credits Dodge’s stance as a key factor in whether tuning solutions were accepted or discouraged. The segment suggests Dodge eventually “embraced” the aftermarket/tuning ecosystem."}},{"startTime":2445.8,"endTime":2457.5,"type":"brand","title":"Magnus Walker","url":"/glossary/magnus-walker","quote":"Guys like Magnus Walker, who's been a fan of modifying his cars and personalizing his cars... Instead of going, we don't talk to him because we don't like him messing with our stuff.","canonicalId":"brand:magnus-walker","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Magnus Walker is a well-known Porsche enthusiast and builder who popularized a style of personalized 911s. The segment uses him as an example of how Porsche culture has embraced influencers rather than pushing them away.","simplifiedExplanation":"Magnus Walker is a famous Porsche fan who builds and personalizes cars. In this discussion, he’s used as an example of someone Porsche culture has welcomed."}},{"startTime":2485.9,"endTime":2490.0,"type":"company","title":"Bring a Trailer","url":"/glossary/bring-a-trailer","quote":"They pop up on bring a trailer and Grand Ray Hall performance and they're a million, million, 1, million, 2...","canonicalId":"company:bring-a-trailer","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Bring a Trailer (BaT) is an online auction platform focused heavily on enthusiast and collector cars. The segment uses it as an example of where these high-value Porsche-related cars show up and sell."}},{"startTime":2569.0,"endTime":2583.6,"type":"concept","title":"right time to sell a car","url":"/glossary/right-time-to-sell-a-car","quote":"So there's never, you know, you, when is the right time to sell a car? [2576.5s] In most cases, it's is hold it as long as you can. [2579.8s] So the answer to that is, is what it's the right time for you.","canonicalId":"concept:right-time-to-sell-a-car","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"“The right time to sell” is about timing the market so the car’s demand and pricing are favorable. The discussion suggests that holding longer often helps, but the best time ultimately depends on the seller’s personal situation and goals.","simplifiedExplanation":"This is basically asking when you should sell your car. Sometimes waiting longer helps the price, but the “right time” is different for everyone depending on their needs."}},{"startTime":2819.4,"endTime":2869.4,"type":"car","title":"Porsche 935","url":"/cars/porsche/935","image":"https://upload.wikimedia.org/wikipedia/commons/4/4c/1977-05-29_Porsche_935_-_Leo_Kinnunen.jpg","quote":"So the value of that nerd 935 has probably gone up enough to cover what all those mirrors would be going for today... one of the most famous Porsche racing cars was the Apple computer Porsche 935","canonicalId":"car:porsche:935","priority":0.9,"confidence":0.95,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"The Porsche 935 is a legendary 911-based race car built for endurance racing and later became an icon in motorsport culture. It’s especially famous for its dominance in the late 1970s and for being adapted into many track-day and customer-racing builds. In this segment, it’s referenced as a highly valuable “nerd” collectible whose value has likely risen.","simplifiedExplanation":"The Porsche 935 is a famous Porsche race car. People love it because it’s a serious track machine and also a big collector favorite. The hosts are saying this specific 935’s value has probably gone up a lot.","imageAttribution":"Lothar Spurzem (CC BY-SA 2.0 de)"}},{"startTime":2835.4,"endTime":2847.4,"type":"concept","title":"Laguna Seca","url":"/glossary/laguna-seca","quote":"since he's had that car raced at multiple times at Laguna Seca, uh, you know, uh, the Duke of Richmond flew it to Goodwood","canonicalId":"concept:laguna-seca","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Laguna Seca is a famous road course in Monterey, California, known for technical corners and the “Corkscrew” section. Racing there is often used as a credibility marker because it’s a real test of braking, traction, and setup. The speaker mentions the car being raced there multiple times to emphasize its track history.","simplifiedExplanation":"Laguna Seca is a well-known race track in California. It’s challenging, so if a car has been raced there, it usually means it’s been proven on a real course. They’re using it to highlight the car’s racing background."}},{"startTime":2841.2,"endTime":2852.5,"type":"concept","title":"Goodwood hill climb","url":"/glossary/goodwood-hill-climb","quote":"the Duke of Richmond flew it to Goodwood, you know, so we can get it there on time and race the hill climb with that thing.","canonicalId":"concept:goodwood-hill-climb","priority":0.5,"confidence":0.88,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Goodwood is a motorsport venue in the UK, and the “hill climb” is a timed ascent event where cars race up a steep course. It’s a major stage for historic and special cars, and participation can boost a car’s visibility and prestige. The segment ties the Porsche’s transport to Goodwood specifically so it could run the hill climb.","simplifiedExplanation":"Goodwood is a famous UK motorsports venue. The hill climb is a timed event where cars drive up a steep course, and it’s a big deal for special or historic cars. They’re saying the car was flown there to compete."}},{"startTime":2875.2,"endTime":2878.7,"type":"concept","title":"livery","url":"/glossary/livery","quote":"we have it in the Paul Newman Hawaiian Tropic livery, but the Apple car, and we've always talked about the second, you know, phase of this car","canonicalId":"concept:livery","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A “livery” is the car’s visual theme—paint, graphics, and decals—used to represent a team, sponsor, or era. The segment references a “Paul Newman Hawaiian Tropic livery,” which implies a specific historical look for the race car. Livery changes often go hand-in-hand with bodywork and replica accuracy.","simplifiedExplanation":"A “livery” is the car’s paint and sticker design—its overall look. It can be tied to a specific team or sponsor. Changing livery usually means more than just repainting; it can require matching decals and body details."}},{"startTime":2988.6,"endTime":2992.5,"type":"part","title":"fiberglass or carbon fiber","url":"/glossary/fiberglass-or-carbon-fiber","quote":"we probably got a like handmade kind of fiberglass or carbon fiber, like one or two of the missing body pieces.","canonicalId":"part:fiberglass-or-carbon-fiber","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"Fiberglass and carbon fiber are lightweight composite materials commonly used for body panels in performance and specialty builds. Using them for missing body pieces can reduce weight and improve stiffness, but it also requires skilled fabrication for correct shape, mounting, and finish.","simplifiedExplanation":"Fiberglass and carbon fiber are materials used to make lightweight body parts. If you’re missing panels, using these materials can help you rebuild the shape, but it still takes careful craftsmanship to make everything fit right."}},{"startTime":3025.34,"endTime":3032.1,"type":"concept","title":"project car","url":"/glossary/project-car","quote":"Adam, it's got to get us, you know, it's got to, like any of these projects, my projects, your projects, got to get the time, the energy, the money, you got to get everything lined up to do it.","canonicalId":"concept:project-car","priority":0.5,"confidence":0.9,"source":"hybrid-fuzzy+gpt-5.4-nano","data":{"explanation":"A “project car” is a vehicle being worked on over time—often with upgrades, repairs, or a full rebuild—rather than something you just drive day to day. The key idea is that it takes coordinated time, money, and effort to get everything lined up.","simplifiedExplanation":"A project car is a car you’re working on for a while. It usually needs repairs or upgrades, and you have to plan the time and money to make it happen."}}],"speakers":[{"id":"s1","name":"Bleav","role":"host"},{"id":"s2","name":"Carcast","role":"host"}],"transcripts":[{"url":"http://getcarcurious.com/episodes/goldberg-s-race-fuel-issue-his-1970-trans-am-track-car-and-supercharging-a-farm-truck/transcript.vtt","type":"text/vtt"}]}