Spring is the “reset button” for diesel trucks after months of cold starts, idling, and temperature swings that quietly degrade fuel and oil systems. The hosts break down why moisture and bio-attracted water lead to oxidation, how winter fuel variety increases soot and DPF load, and why a deep fuel clean with diesel extreme (plus a stronger rail-plumbed diesel injector flush when needed) can restore efficiency. They also cover oil-side issues like fuel dilution and total base number dropping over time, recommending oil cleaning plus oil analysis. The discussion ties it all to preventing expensive injector/DPF problems and includes product and event updates.
Hot Shot’s Secret chats with us about a commonly overlooked part of
maintenance - Spring cleanout. All Winter your diesel truck endured cold
starts and increased idle time. What does that do to a fuel system?
Does engine oil take a beating as well? We cover a Spring checklist to
ensure your diesel truck doesn’t skip a beat.
Learn more about your ad choices. Visit megaphone.fm/adchoices
"...we had talked a couple of times about freezing diesel fuel and all the issues that we have in winter."
In winter, diesel can get thick and start to gel. When that happens, the truck may be hard to start because fuel can’t flow the way it should.
Diesel fuel can gel or partially freeze in cold weather, restricting flow to the fuel system. That can lead to hard starts, loss of power, and potential damage if the engine is repeatedly cranked while fuel can’t move properly.
"I'm sorry, injector cleaner, c-tain booster, water demulsifier, lubricity additive,"
Lubricity additives help diesel act more like a lubricant. That can protect the precision parts in the fuel system from extra wear.
Lubricity additives increase the lubricating properties of diesel fuel, which helps protect fuel system components like pumps and injectors. This is especially relevant with ultra-low sulfur diesel, which can have reduced natural lubricity.
"...all the way to the rail through the injectors, get everything flushed out and give you a clean start for the year."
Injectors are the parts that spray fuel into the engine. If they get dirty, the engine can run rough or not burn fuel as well.
Diesel injectors are the components that precisely meter and spray fuel into the combustion chamber. Deposits or partial clogging can cause poor spray quality, rough running, and reduced efficiency, which is why injector-focused cleaning is a common maintenance idea.
"...we see so much more idol hours and you're right, you're sending a lot more particulate to the DPF, if it's a emissions truck... So, um, now on a DPF system, it's going to actually be cleaning itself out with"
DPF means a filter that catches the dirty soot from a diesel exhaust. Over time it has to clean itself out, or it can get clogged and cause problems.
DPF stands for Diesel Particulate Filter. It traps soot (particulate matter) from the exhaust and periodically burns it off through regeneration so the filter doesn’t clog.
"So, uh, diesel extreme is the product that you'd use, um, that's going to clean up all that soot and carbon deposits that are left behind. Now it's not going to clean out your DPF."
Diesel Extreme is a diesel additive/product the host recommends to help clean out soot and carbon. They also say it won’t fully “fix” a DPF if the filter isn’t regenerating correctly.
Diesel Extreme is mentioned as a specific product used to clean soot and carbon deposits. The speaker frames it as a way to improve spring readiness, while noting it won’t replace proper DPF cleaning/regeneration.
"Like the, the adding side just comes from the C-tane boost and the lubricating the fuel that's keeping the pump, you know, lubricated."
Many diesel fuel treatments include lubricity additives to improve the fuel’s lubricating properties. This matters because diesel fuel lubricates components in the fuel system (especially high-pressure pumps), reducing wear.
"So there's two gains that you get from the diesel extremes... Like the, the adding side just comes from the C-tane boost and the lubricating the fuel that's keeping the pump..."
Cetane is a property of diesel fuel that affects how easily it burns. A “cetane boost” additive is meant to help the engine burn the fuel more cleanly and reliably.
“C-tane boost” refers to raising the diesel fuel’s cetane rating (often via additives). Higher cetane generally improves combustion quality, which can help cold starting and smooth running, especially after winter.
"...a lot of times people don't look for an additive solution until [907.7s] they have a problem."
A fuel additive is something you pour into the tank to help keep the fuel in better shape. The point here is that people often wait until the truck is already acting up.
A fuel additive is a product added to diesel to improve performance or protect against issues like microbial growth, water contamination, or fuel degradation. In practice, additives are often used as a preventative measure, but the speaker notes many people wait until they already have a problem.
"...demulsifying, stabilizing and rust inhibiting does all of those."
Fuel stabilizers slow down fuel oxidation and degradation during storage. For diesel owners, this matters when trucks sit for periods or when fuel quality varies by season and supply chain.
"...stabilizing and rust inhibiting does all of those."
Rust inhibitors are additives that help protect metal surfaces in the fuel system from corrosion. This is particularly relevant when water contamination is present or when fuel sits for long periods.
"So, uh, yeah, I get it. ... you’re talking a few cents per gallon to treat."
Additives are often priced as a small amount per gallon of fuel. That makes it easier to judge if it’s worth it compared to the cost of diesel itself.
“Cents per gallon” is how additive products are often priced and compared to fuel cost. It helps owners evaluate whether the treatment cost is reasonable relative to the potential benefits (cleaning, lubricity, water handling, etc.).
"...And then with a company like Hot Shot Secret and your dealer network, now"
Hot Shot Secret is a company that sells diesel-related products, like additives. They’re mentioned because their network can help collect information from many trucks, not just one.
Hot Shot Secret is a well-known diesel fuel additive and filtration brand in the U.S., often associated with products used to help protect diesel fuel systems. The host mentions it in the context of having a dealer network that can provide broader real-world data.
"if there's consistent issues out there and we're all kind of. That, that's what feeds our R and D here."
R and D means research and development. It’s how a company tests ideas and improves products based on what customers are experiencing.
R and D stands for research and development—the process of improving products through testing and iteration. The speaker says customer issues and data feed into their R and D, implying they use field experience to refine diesel-related products.
"So we sell direct on our websites. You can go to hotshotseeker.com and buy our products."
They’re saying you can buy their products online directly from their website. That means you don’t have to go through a store or dealer to get diesel parts.
The speaker mentions hotshotseeker.com as a direct-to-consumer sales channel. For truck owners, this is often where diesel performance parts and accessories are marketed and sold without going through a traditional dealership.
"They're the ones finding the issues with these vehicles before they, before it's widely known, um, and you're right, our, our shops, our diesel, uh, partners that are our dealers are our best like canaries in the coal mine."
“Canaries in the coal mine” is a metaphor for early warning. In this context, dealers and repair shops see symptoms first in real-world use, before the broader industry fully recognizes the pattern. That early detection helps identify root causes and triggers fixes like TSBs.
"[1741.8s] DFC diesel is a sponsor of the podcast.
[1744.9s] We worked with them, you know, hand in hand on doing episodes, answering
[1747.7s] technical questions, they have a complete lineup of Cummins, Duramax and Power"
DFC diesel is a company that sells diesel truck parts and engines for people who want upgrades or replacements. In this episode they’re sponsoring and helping with technical info.
DFC diesel is presented as a sponsor and an aftermarket supplier for diesel truck engines. The host says they provide remanufactured engines and support technical questions for customers.
"[1775.8s] sometimes the options
[1775.8s] that are out there, it's just, it's a basic OEM engine.
[1778.2s] You want a little bit more."
An OEM engine is the factory-style engine, built to the original design. The host is saying that sometimes you want something more than the basic factory spec.
OEM stands for Original Equipment Manufacturer—meaning the engine is built to the factory design/spec. The host contrasts a basic OEM replacement with upgraded options to avoid repeating the same failure.
"[1812.1s] So you can add that into your build and be able to get better fuel economy,
[1816.3s] you know, increased power, increased torque and better engine life out of it."
Fuel economy is how efficiently an engine converts fuel into usable work, usually measured as miles per gallon (or similar metrics). The host connects the piston/engine build choices to improved fuel economy, implying efficiency gains from better combustion and airflow.
"[1812.1s] So you can add that into your build and be able to get better fuel economy,
[1816.3s] you know, increased power, increased torque and better engine life out of it."
Torque is the twisting force an engine produces, which strongly affects how strongly a truck accelerates and how well it pulls at low to mid speeds. The host groups increased torque with the other benefits of the upgraded engine/piston setup.
"Visit fastride.com to find the perfect fuel system upgrade for your truck."
They’re pointing you to a website where you can shop for a fuel upgrade. The idea is to find the right setup for your truck.
The host directs listeners to fastride.com to find a fuel-system upgrade for their truck. It’s positioned as a way to match the right system to the vehicle.
"[1949.1s] You know, death fluid itself is is urea and water.
[1953.0s] It's a very poor product or it's just some nasty stuff, but it"
DEF is made by mixing urea with water. The truck relies on that exact mixture to make the emissions-cleaning system work.
DEF is made from urea dissolved in water. This specific chemistry matters because DEF is injected into the exhaust system and must behave correctly for the emissions process to work as intended.
"We're dealing with, uh, so we're looking, we're dealing with, uh, fuel [2250.6s] dilution. [2251.6s] Um, we're looking at water in the system."
Fuel dilution means some diesel fuel ends up mixed into the engine oil. That can make the oil thinner than it should be, which isn’t great for protecting engine parts.
Fuel dilution is when diesel fuel leaks past the combustion process and mixes into the engine oil. It typically happens more during cold starts, idling, or short trips, and it can thin the oil—reducing lubrication and increasing wear risk.
"One thing is a little different on the oil side that I think a lot of people [2264.8s] forget is that in your diesel oil, um, we have, we have detergent."
Detergent is an additive in oil that helps keep the engine cleaner by preventing gunk from sticking to parts. It helps manage buildup from normal diesel operation.
Detergents are additives in diesel engine oil that help keep contaminants suspended and reduce deposit formation on internal surfaces. The host is emphasizing that diesel oil isn’t just “lubrication”—it also has chemistry designed to manage cleanliness.
"So then it just gets picked up in your oil filter or once you get done with that interval, when you dump your oil, all that nasty gunk is coming out with it."
An oil filter traps suspended contaminants as oil circulates through the engine. The speaker is describing a cleaning mechanism where loosened deposits end up captured by the filter or removed at the next oil change.
"But as soon as you introduced oil analysis, uh, which doesn't cost much, I, we do analysis at, at cost here at hot shots."
Oil analysis is when you send a little sample of your used oil to a lab. They look for signs of engine wear or dirt in the oil so you can spot issues before they become expensive repairs.
Oil analysis is a lab test of a used engine oil sample to check wear metals, contamination, and oil condition. For diesel truck owners, it helps catch problems early and confirm whether maintenance intervals are appropriate for how the truck is actually used.
"These kits are, I think 25 bucks. Um, and that even comes with like a prepaid mailer. So comes you fill it up on your oil change and you just drop it in the bag"
An oil change is when you drain the old oil and put in fresh oil. It’s part of keeping the engine clean and lubricated.
An oil change is the routine replacement of engine oil and (usually) the oil filter. In the context of oil analysis, the sample is taken during or after an oil change so the lab can evaluate what the oil collected while it was in the engine.
"because the first oil analysis is kind of like, yeah, it's kind of like a shot in the dark. It's kind of a baseline kind of see a snapshot of time where we're at."
A baseline is your first oil test result that acts like a starting point. After that, future tests are compared to see if things are getting better or worse.
In oil analysis, a baseline is the first test result that establishes a reference point for your specific engine and operating conditions. Later tests are compared against this snapshot to spot trends like increasing wear or contamination.
"Make sure and head on over to kershaw.kaiusa.com. [3314.4s] Use code 20 TD eight FR 26 to get 20% off your order."
That link is the sponsor’s store website. They’re telling you where to go to buy something with a discount code.
This is the sponsor’s website for Kershaw products. The hosts are directing listeners there using a discount code, so it’s relevant for anyone following the show’s sponsor offers.
"Whether it's a new knife or EDC hunting, fishing, something around the job [3327.1s] side around the house, they've got you covered"
EDC means “everyday carry.” It’s the kind of knife you’d keep with you for normal daily tasks.
EDC stands for “everyday carry,” meaning a small, practical item you keep with you regularly. In this context, it refers to knives designed for daily use rather than only hunting or specialty tasks.
Select text to request an explanation
Welcome to the diesel podcast presented by DFC diesel.
Oh, welcome to the diesel podcast.
Got a bunch of cool maintenance products I see in front of you there.
And we're just getting out of that, you know, the winter season where we had
talked a couple of times about freezing diesel fuel and all the issues that we
have in winter.
And you'd mentioned, Hey, there's a, there's a huge opportunity that truck
owners have as we get into spring to really potentially avoid some costly
repairs or, you know, some different things based on, you know, the weather
changing. So welcome back.
Look forward to chatting with you.
Hey, thanks, Patrick.
It's always good to come on with you and glad to kick off another, another
season and get, get this cold stuff behind us.
So, uh, yeah, looking forward to talking about a little bit about what winter does
to these diesel systems and what to do to get ready for spring.
It is the season.
So what, what happens to trucks like for the last five, six months when they've
been colder temperatures, rough starts, cold starts, all that sort of stuff.
What, what does it do to a fuel system?
Well, you know, it's, it's one of those things where it's, it's a rough, rough
time of year on diesels in general.
And I know, um, a lot of people, you make it through the winter and they think,
well, everything's going, maybe it's time for some maintenance and whatnot, but,
uh, uh, it's not broke yet.
I'm not going to go and fix it.
But in reality, uh, your, your biggest issues fail after winter.
Uh, it's really kind of like the, the lead up to failure.
So it's a perfect time of year to just hit the reset button, uh, do full
clean out on everything and set yourself up for the spring correctly.
So, uh, yeah, let's start with the, let's start with the fuel side.
Uh, because it's something that you and I've talked about a whole bunch.
And, uh, one of the biggest problems with diesel fuel in the winter, well, we've
talked a lot about how little they advertise the fuel.
We hope we have some good anti-gel in there from the pump, et cetera.
Uh, but also the chemistry changes in the fuel systems, um, in the
fuel that we get from the pump.
And so you get a larger variety of fuel in the winter than you do in the
summer, um, some for the good, some for the bad, but, uh, that variety of
fuel often starts to cause problems as well.
So the, one of the, one of the things I always first look at, uh, and especially
if we start doing like some fuel sampling for some of our big fleets that
slow down in the wintertime, uh, moisture, you know, it's, it's the water in the
system, we, we have the changing climate.
So, uh, as the temperature swings, you start to develop a lot more moisture in
the system than you naturally do in the, in the warm days of, of, of the summertime.
And, um, especially with more bio now in our fuel, which attracts moisture, even
on top of that, uh, we're just compounding it in the wintertime.
And, uh, and that moisture gets in the system.
And, uh, we all know the problems with that.
And then it can also lead to oxidation and, and all sorts of, of, of headaches
that you may not feel as you exit winter, but it took its toll and each
winter it takes a little bit more toll on that.
So I think that's one of the key things with the fuel that, that we always
want to kind of look for is, uh, is getting all the moisture out of the
system after a big, uh, uh, change to the, change to the temperature, the
ambient temperature out there.
What do we, what do we do like in springtime to clean as much of that
out as possible?
Well, the first thing is your, most people don't see it or feel it right away.
The first notice you're going to have is usually some, uh, mile per gallon
change and that's just when the fuel system's kind of dirty, kind of
struggling from the, uh, you know, the harsh winter.
So, uh, we've talked a lot about our everyday diesel product, you know, it's
a, it's a fuel system treatment that you should be using every single tank.
We have a winter version.
So hopefully in the winter, you're using that to also add the, the anti-gel to
it, but the big hitter to come out of the spring is our diesel extreme.
It's, uh, it's got the same six components because, you know, we've talked
a lot about fully formulating the fuel to bring the pump fuel up to a premium
spec, uh, uh, making it a great fuel as well as protecting the fuel system.
Well, we keep all of that in the product in our diesel extreme product.
But this is really designed to do a deep full system clean.
So it does have injector cleaner, a water demulsifier, uh, uh, in injector cleaner,
I'm sorry, injector cleaner, c-tain booster, water demulsifier, lubricity additive,
a rust inhibitor, and a stabilizer.
What makes this one unique is that we max out what the EPA allows us to put
in for fuel system cleaning.
So there's just nothing stronger out there to do a one tank full cleaning.
So that time of year when we're, I usually get around to my diesel extreme.
Every time I change my oil, it's kind of my reminder, you know, I'm cleaning
out the oil side, it's probably time to clean out the fuel side.
And this is the time of year, regardless of where I am, where my intervals fall.
Um, I always hit the reset button to start the spring.
It's the time to clean it all out.
So first thing I do is, uh, hit the tank with a heavy dose of deep diesel
extreme, make sure that we clean out the entire tank, the lines, all the way to
the rail through the injectors, get everything flushed out and give you a
clean start for the year.
Now, one unique thing that I don't know if I've even talked to you about, uh,
one of our newest products, uh, we just released this past year, it is our
diesel injector flush.
And this is, uh, I know you, you, you love my, my stupid analogies I use all
the time to try to explain this stuff.
Um, I've said to you a lot that diesel extremes kind of like going to the
dentist while everyday treatments like brushing your teeth every day.
Well, we now have what I consider orthodontal surgery.
So this diesel injector flush is diesel extreme on steroids.
Now it doesn't have all the extra, uh, ingredients to, you know, to, to, that
we try to formulate in an everyday use.
This is specifically a problem-solving project.
Matter of fact, it is so potent that let's not really even call it a fuel
additive.
Uh, this is really designed for, uh, shop use, um, very talented, uh, people
that can wrench pretty well, but this product's intended to be plumbed
directly to the rail.
So if you're coming out of winter and you're having some injector issues, um,
the fuel system kind of, uh, feels like it needs to clean out 99% of the time
diesel extreme can get the job done.
Um, if you're still struggling after a dose of diesel extreme, there is this
new option called diesel injector flush.
It's a little more aggressive and it also takes, it's not as easy as pouring
in the tank because this would require you, uh, plumbing it to your lines.
Um, a lot of guys have lift pumps.
Um, it's a good way to pick it up there or the old gangster way of doing it
also is pulling your fuel filter and filling that up.
So he gets a slug of this right to the rail and, uh, there is, if, if this
doesn't clean out, uh, that part of the fuel system, then you have a bigger
problem and nothing's going to clean it out.
Hey diesel fans, our friends over at Kershaw Knives have a 20% off code for
you. If you go to kershaw.kaiusa.com and use code 20, TD eight, FR 26, you
get 20% off your cart and free shipping over $50.
So if you're in the market for a new EDC knife, something for hunting,
fishing around the job site, around the house, they've got you covered with a
whole bunch of different choices for blade, steel, blade shape, different opening
mechanisms, different handle designs, and it's great.
We'd save some money and get some cool gear again.
Go to kershaw.kaiusa.com, use code 20, TD eight, FR 26, and get 20% off your
cart and free shipping over $50.
One of the things that I, I noticed with my own truck, like during the winter
time is I idol it a lot more and I imagine that just that lower engine
temperature, lower RPM, you know, sometimes it's 15, 20 minutes, whatever it
might be, like it's just, there's probably more soot and more accumulation of
it that's going to build up that I've done for the last five or six months.
And then all of a sudden the weather changes.
Now we're in the 60, 70s, 80 degrees.
I don't have to do that, you know, as often.
Is that where diesel extreme will, does that clean it out or give me the best
option to do it without plumbing it in like the, the newer product you guys
have, where I got to pull that right from, you know, either the fuel filter or
in one of the other options.
Yeah, you nailed it.
Um, those long idols, uh, that we do in the winter time, we, you know, I, I let
mine start up a lot longer.
I let it, uh, you know, before I jump in, but a lot of people also don't shut
them down in the winter either.
So we see so much more idol hours and you're right, you're sending a lot more
particulate to the DPF, if it's a emissions truck, uh, but the, the soot game
really steps up in the winter time.
So, um, now on a DPF system, it's going to actually be cleaning itself out with
the regions.
So your regions are probably up quite a bit in the winter time as you have more
idle time, uh, now using a good fuel additive, uh, bringing that sea tane up allows
for a more complete burn of the fuel, um, which is less particulate to the filter.
So, um, it helps that process, but you got to remember, we have a lot of
different varieties of fuel in the winter and we're also adding stuff.
You know, um, there's only so much you can put in a formula, uh, whether it's
the fuel jobber or if you're adding additives yourself that there's technically
a give and take with that.
So we need anti gel in there in the winter.
Um, so if you don't have as much sea tane, you're going to be sending more
soot through the system.
And so after a whole winter that the soot buildup is one of the biggest issues.
And you're also just being inefficient at that point too.
So, uh, diesel extreme is the product that you'd use, um, that's going to clean
up all that soot and carbon deposits that are left behind.
Now it's not going to clean out your DPF.
There's different ways that you have to do that if it's not
regenning properly, uh, but, uh, the fact that you'd know that you're going
through more regions is telling you that how much soot you're putting through
that system.
So it's just even more vital to, uh, run a batch of diesel extreme through to
make sure that you've got a nice clean start for the spring.
I'm going to throw you a curveball here.
Uh, bring it.
I like curveballs.
Like for those of us that live in the Rocky mountain region, you know, like this
time of year, we start to warm up, gets into 60, 70s, but some of our biggest
snow is in March and April where, you know, you get a foot, foot and a half of
snow and then next day it's back up to 70 degrees or 60 degrees.
If I go through this process where I clean out what happened during the
wintertime, use a diesel extreme and then a week or two later.
Temps drop back down to 30, 20 degrees, whatever it might be.
I get some snow.
Do I need to restart that clean again?
Or is it just, cause it was only one time where it's just a few days.
It hasn't had the accumulation of months and months and months.
I don't need to do it again.
Good question.
Uh, not too much of a curveball.
I think I can hit this one.
I hung it out over the plate too much.
But, uh, it is, no, it really is a good question though.
Uh, the, the diesel extreme is going to clean it down to zero, right?
So there's two gains that you get from the diesel extremes, the
reach, restoring of performance and then the adding of performance.
Like the, the adding side just comes from the C-tane boost and the
lubricating the fuel that's keeping the pump, you know, lubricated.
Um, but the first side is actually restoring lost efficiency.
So once you've got it cleaned out, that's like trying to clean the glass.
You just clean.
So, uh, it's already pretty clean.
So if you then have another snow and you're staying on diesel fuel
additive for a while, um, assuming that you're staying with a fuel additive, uh,
we like for our EDT bottle, let's say that you just did a deep clean with
diesel extreme, but you're still on the winter defense.
You're still, uh, using the, the anti-gel product to get through the winter.
You're, those all have injector clean them as well, but we dial that
injector cleaner down to just to keep clean level so that it provides
proper maintenance, but it's also affordable to use over the long term.
So if you were just now to do a deep clean and then you still had some,
some deep snow to go through and the winter wasn't quite done with you,
you're going to be fine.
Uh, as long as you're staying on a, on the fuel additive that has injector
cleaner in there to keep it nice and, nice and clean, uh, but coming off
the back end of a diesel extreme flush, it's just, uh, it's a sparkling clean
system that, um, if you had another couple of snows out of it, that you were
on cold weather, you can continue on with your maintenance.
As long as you're doing a maintenance program where you're keeping
fuel additive in there.
How common do you think are, or maybe, maybe not common's right word, but I
think I always like to think about like, uh, a truck enthusiast listening to
this podcast, they're in the shop or they're driving or they're hot
shotting or something like that.
And like we all have that friend or group of friends or something that's
got 350,000 miles on their truck.
They've never done anything to the fuel.
It runs as great as it did when they got it off the lot.
And then we have other people that have had issues with their fuel systems.
And some of them have gotten pretty expensive to fix.
Like the feedback you get from the shops that you work with, or even people
calling in on the phones, like how common is it for people to develop or
notice problems with their diesel truck during this seasonal change?
Once it, once it warms up, is it more common than we may think it is?
It is, it is, and that's, that's a great question.
That goes down to our whole world anyways.
It's us trying to educate people that maintenance is a lot cheaper than, you
know, you know, the prevention side's a lot cheaper than, than fixing problems.
So, um, but a lot of times people don't look for an additive solution until
they have a problem.
And then a lot of times that person then becomes an additive user to, to prevent
it going forward, but this is the time of year when people usually see it.
And I, and it go, again, it goes back to that mindset of you kind of know, you're
the one starting your truck every day.
You know, it's tougher in the winter.
You know, it's, it's kind of ornery when you get her going and everything.
So, uh, when you make it through that winter and it starts to warm up and your
truck's firing up and getting to temperature a lot quicker and all that stuff,
you kind of feel like, Oh wow, I made it through.
But, but the truth of the matter is, uh, you know, that, that wear is being done in
the winter when that happens, but it really doesn't show its face until you
start getting back to springtime temperatures and heavy usage again.
Now we're not giving it, it's not just idling for warm up, but we're using
the vehicles a lot more for most people.
Um, and so it's kind of coming out of that long slumber of winter and we're
often running.
So it's the spring when a lot of times the winter caused issues start to show their
face.
So that's why we always find that spring is the perfect time to hit the reset button.
Um, I like to do it in the fall as well, you know, but I think it's more important.
Uh, after, uh, after the winter, uh, as you go into the fall, you know, we, we
talk often about, you know, when it's time to start using a winter additive and
everything and the mindset is, Oh, we kind of made it through our heavy season
and starts to slow down.
We're hitting this cold season.
Well, these trucks like to be worked.
Diesel's like to be running.
They like to be driven for a while.
You know, they just, they don't, they're not your normal A to B grocery
getter, um, that actually puts more load on these systems than, uh, one that's
being used hard.
So, uh, in general, we see that usage goes down in the winter.
Um, idle time goes up and you think the average mind would say, Oh, well, it's
getting a little bit of a break this winter.
When in reality it's like one of those work dogs, you know, it wants to work.
You got to walk the dog.
So, uh, when it's all trapped up in the winter, we want to do a, a good
maintenance, get everything nice and flush.
So it's ready to run when springtime comes.
One of the big things with diesel fuel, like I used to think when I first got a
diesel truck way back when, and for a long time of owning one, I always looked
at it like gas, like, you know, you have a gas vehicle, you pick the octane fuel
is fuel.
You don't really have to worry about much of any of this with a gas vehicle.
And I used to think diesel was kind of the same way.
I thought there was just like one set standard.
Everyone achieves it regardless of where you purchase it from, but I've
learned through doing episodes and talking with you and, and, uh, just
discussing the inconsistency that's there from pump to pump, the amount of water,
the sea, tane, lubricity, the change like with ULSD compared to older trucks that
were designed on something with more sulfur in it.
It's just so inconsistent.
And I immediately think of like when you own a diesel truck, one of the things
that maybe people don't tell you is they're more expensive to maintain.
They're more expensive to fix.
And you look at a price of a set of injectors or a CP4 or CP3, it gets
really expensive really fast.
So I don't think as a diesel truck owner, you can afford to not do maintenance on
it, or to not have a preventative maintenance program, I should say.
Well, you pay one way or the other is kind of how I look at it, you know?
And, uh, you're right.
They're, they're, they're great.
They're great vehicles that last forever when you take care of them.
And, um, we are punished by how poor diesel fuel is.
And you're right.
Initially there, like gasoline is a whole different ballgame.
And gasoline is a very highly refined product.
Um, what I always find strange is inside the gas world, somehow it's
made it to the gas consumer, you get multiple great options.
Um, and there's some reason for octane from engine knock and stuff, which
we'll get into on the gas podcasts one time.
But, uh, as far as the diesel podcast, the, the, the fuel, we get one, we
get one choice at the pump and it happens to be the fuel that is terrible.
You know, and so we don't get options at the pump, but there are a couple.
There's like some cool Midwest, uh, places that I've seen that actually
have premium diesel fuel options at the pump that it'd have treated fuel,
which is really cool.
Um, I wish everybody would have that option, you know, but, uh, that's
why our world exists is because this gives you the ability to, you know,
treat your own fuel and make sure that you're bringing poor fuel up to spec.
And what's, what I find really interesting about it since they've got
that all buttoned up on the gas side and you have your options of, of, you
know, these platinum tier detergents that they're throwing in their fuel, but
you're paying 20, 30, 40, 50 cents more per gallon for those fuel and people
don't blink and do it at the pump.
But yet when they look at the additive market and on the diesel side, since
you don't have that option at the pump, it gives you your choices to purchase
a product and add it yourself.
And then people say, well, it's expensive.
Well, a treatment of, a treatment of EDT, which you can use in every single
tank, um, which does those six things I mentioned earlier, you know,
See something that's not quite right? Our annotations are AI-generated and can sometimes miss the mark.
Click the flag icon on any annotation to suggest a correction.