Direct injection engines, particularly GM's Gen 5, face fuel limitations when pushed for higher power outputs. Michael from Too High PSI discusses innovative solutions to enhance fuel delivery, including a hybrid system that combines direct injection with port injection. This episode dives into the technical challenges and solutions, such as installing port injectors and integrating with factory ECU systems. Real-world performance data showcases the potential for significant horsepower gains, making this a compelling discussion for those interested in maximizing engine performance.
Direct injection has many benefits for OEM applications, but it isn't as easily customised as port injection options on some platforms. Why is this the case, and what can we do about it?
Due to the nature of direct injection and how it operates in a GM application, it simply isn't a matter of adding aftermarket injectors and turning up the fueling like we often can with port injection, given that DI fuel pumps in GMs LT engines are camshaft driven.
Michael Sitar of TooHighPsi has an option for GM LT V8 owners that can take the LT1 and LT4 variates beyond their 600hp and 700hp ceiling imposed by the stock direct injection system without dealing with camshaft complications, and that is done by adding port injection and tapping into the factory GM ECU's CAN Bus data stream.
At this stage customers are up in the 1400hp regions with some drag applications with plenty of margin left in their injector duty cycles for future development and additional power potential.
"...e run completely off the MAF meter. Same with the E92 GM computer runs. We also use all the same strate..."
Select text to request an explanation
One of the problems with GM's newer Gen 5 range of engines is that they are direct injected In stock form.
That's a great thing, but when we start adding more and more power, it's very easy to run out of fuel capability.
And we're here with Michael from Too High PSI to talk about a specific solution that they've engineered.
Welcome to High Performance Academies' tuned in field report podcast series.
In these special midweek episodes we look back through our archives to find the best conversations we've had through years worth of attending the best automotive events across the globe.
We've pulled the audio from these tech filled interviews with some of the industry's most well known figures and presented it in podcast format for you to enjoy as a quick hit of insider knowledge.
Now, michael, before we talk about your solution, let's just talk a little bit more about why that direct injection can be problematic.
Where do the limits lie?
Well, I mean basically you have a system which has got injectors in at one size.
It has a mechanical fuel pump which runs off the camshaft and those both were sized for the basic production engine.
We've got a CVU maybe 20-30% of extra capacity in there, but these LT engines can handle way more power than that and the issue is that you run out of fuel pretty quickly.
Alright, let's talk about kind of where that limit is in stock form.
What sort of power will we be likely to be able to produce with an LT based engine, maybe with a blower on pump fuel, because the fuel does factor in here.
We'll talk about more.
So if we're talking LT1 with a supercharger that's the lower power version you can get to right about 600 horse on a stock fuel system and that's pushing the limits everywhere.
Most kits you'll find will be around 550 to 575.
If we go to LT4, which is a higher output, already supercharged engine, we can get that up to about 700 on pump gas with the stock fuel system.
Now, traditionally, when it comes to direct injected engines, there hasn't been a massive aftermarket supplying larger injectors, like we see with port injected engines.
Most people watching this would probably think, well, just put a bigger injector in it.
It's not quite as simple, but there is an aftermarket now supplying larger injectors and pumps for these engines.
That's one viable option.
Yeah, definitely.
I mean, there's 30 over injectors that a lot of guys use.
If you use those, you have to get more fuel pump too, so you're gonna have to put a camshaft in the car with a bigger cam lobe to move that pump further and possibly a bigger bore pump to get more volume out of it.
So let's come back and talk about your specific solution and what does that involve?
Okay, well, our system is basically a hybrid fuel system.
We've taken the DI system and added port injection to it as well.
So we continue to use all the capacity, all the benefits of the DI system.
You know you get your in cylinder cooling detonation prevention from that and then we add the homogeneous charge of a port injector under high loads to supplement that, to make sure you can keep going.
Okay, so there's two challenges, as I see it, with this system.
The first is the mechanical installation physically getting a set of port injectors into what is already a very tight engine configuration.
So let's start with that.
How are you managing that?
Okay, so we do.
Basically, for most supercharged and for natural aspirated or turbo applications we have a set of port plates.
So most intake manifolds or superchargers for LT engines don't have any way to put port injectors in, so we have a port plate which, if we want to see it, basically sandwiches between the supercharger and the cylinder head and it holds the port injector.
Okay, and then does that allow the use of any of the user range of aftermarket port injectors, or does it have to be matched with something specific?
The only thing that's critical about it is the length of the injector.
Depending on the application, we have different lengths that are required, but, yes, any of the large port injector manufacturers.
We use their parts exclusively through this.
Okay, so that's the physical installation.
We also need to get the fuel to the injectors, and there's obviously fuel already running to the high pressure DI pump, so are there any complexities around getting that fuel also supplied to the rails for the port injectors?
For the most part.
No, it just pretty much will connect right in there.
We splice it into the factory line coming up from the back of the vehicle and then at that point we basically feed the fuel rails and then feed the high pressure DI pump at the back of the engine.
Okay, so that covers the physical installation and getting the fuel to the injectors, but then we've got the control element, which is absolutely just as important.
Obviously, that factory engine management system there is designed and expecting to run the factory direct injectors, so how are you then adding the fuel through the port injectors as well?
Okay, so once the injector is installed we have fuel to them.
For the port injectors we have a controller which call a Reflex Plus.
It's a relatively nice, simple port controller.
Does have a lot of capabilities, but initially we're only using it for injecting the fuel.
It is full sequential and it uses the CAN bus and two inputs, the CAN shaft and the MAF meter, to basically control all the fuel into the engine.
Do you want to take your car knowledge game to the next level?
Join us in the next free lesson at hpacademycom.
Slash free and start developing your own skills today.
Okay, so there's a bunch to dive into there.
Let's start with the CAN bus.
What information is it getting via the CAN bus, and is this just directly connected to the factory GM CAN bus?
Yes, it basically tees into the CAN bus when you install it.
We provide a plug and play solution for that.
Once CAN bus is in, you can get everything that's basically available on the CAN bus.
We don't request anything off the CAN bus, we just receive the data there.
So flex fuel engine, RPM, manifold, pressure I mean any of those variable items you'd like to have are all available on the CAN bus for us to access and use with the controller.
Alright, so from there I will assume that you can use some laptop tuning software to physically set up a table of supplying the additional fuel.
So that is a way of solving that problem.
Obviously it gets the fuel into the engine, but the integration then with the factory ECU?
I mean the factory ECU doesn't know you've got this auxiliary unit, doesn't know extra fuels being added.
Now, on face value, I could imagine there being some complex sensors around there.
So can you tell us how you deal with that?
Sure, well, to begin with we run completely off the MAF meter.
Same with the E92 GM computer runs.
We also use all the same strategies that they have in there.
So our controller has a MAF curve in it, it has a power enrichment in it, it has an injector size, of course, for the size you're running air fuel tables based off of your alcohol content.
All that's the same as the E92.
You basically have a duplicate in this.
And then we have a calculator which is an Excel spreadsheet you can download from our website and it basically takes the input data from the E92 and then you just tell it how much port you'd like to run, say, for example, 30%.
Put that in there.
It will give you new curves for the E92 and new curve for the tuner pro.
You can copy and paste those right into the two devices, fire it up and you're probably going to be very close for what you need and you can tune from there.
Okay.
So just to back that off a little bit, you use the term MAF there, so massier flow sensor so that is its name implies tells the factory ECU, and in this case also your auxiliary module, what the massive area entering the engine is.
Obviously we need to know that in order to know what massive fuel to deliver to get a specific air fuel ratio.
So nothing too crazy going on there, I'm assuming.
What you're actually doing then is kind of cheating the MAF curve back inside of the factory ECU, past the point where you're introducing port injection.
Is that?
correct, correct, that's right.
So we'll reduce the amount by whatever percentage we put in there, say 30%, we'll reduce the MAF curve.
The calculator will do that.
So that does what you know.
If it's an automatic transmission car you're going to have additional complications there that you'll have to work a little bit some of your torque management to get that back up to where it needs to be for what you removed from the MAF curve.
But other than that, in small instances it's not very difficult, when you get to high volumes like 60% port, then you'll have a little work to do on your homework.
Goal become important.
So again just to back that up a little bit there, so that calculator's really taking all of the heavy lifting out.
As far as the tune is concerned, it's giving you a new curve to put into the factory engine management system.
Like for fuel for fuel.
So that keeps everything happy.
But, as you mentioned there, as you're essentially under reporting mass airflow to the factory ECU, therefore its torque calculations are off.
It essentially thinks that the engine's making less torque than it actually is.
So that's where you need to go and do a little bit of extra work, alright you need to get back up to the output that the engine's providing, and you'd generally do that from the dyno.
Okay, in terms of limitations and power, are there any?
What have you seen out of these kits in the real world?
I mean for the most part, most cars that we do are generally above a thousand rear wheel horse.
We have some more simple cars that still have run stock LT engines that are right at 700 rear wheel horse.
That's pretty much a safe limit for an LT1 on full E is about 700.
You can much over that.
You're going to hurt pistons even just over and under load.
But anything that's a good built motor is no problem.
We have cars up as high as 1,440 rear wheel horsepower and they of course are more extreme drag cars at that point.
And I'm guessing if you wanted to go further, that would simply be a case of fitting larger port injectors.
Exactly.
I mean most guys will run up to about a thousand.
We do have some guys with 170s in them.
That's a lot of port injector.
They've probably only run a 50% duty cycle but with a goal of 100 someday.
Everyone needs a dream.
They've got that more power.
Michael, thanks for giving some insight into the product.
If people do want to find out a little bit more, where are they best to do so?
Sure, they can find us on our website toohighpsicom, and it's just toohipsicom.
Thank you Perfect.
Thanks a lot, Michael.
You bet nice talking to you.
If you enjoyed this podcast, please feel free to leave a review on whatever platform you've chosen to listen to it on.
It goes a long way to help us getting the word out there.
All these conversations and much more are also available in full on our High Performance Academy YouTube channel, so make sure you subscribe.
It's a one stop shop when it comes to going faster, stopping quicker and cornering better.
Request an explanation for:
1 cars
1 cars featured
Request an Explanation
Heard something you'd like explained? We'll add it to this episode.
Sign in to request explanations for terms you heard.
Want to learn more?
Browse our glossary for plain-English explanations of automotive terms, jargon, and concepts.
See something that's not quite right? Our annotations are AI-generated and can sometimes miss the mark.
Click the flag icon on any annotation to suggest a correction.
