Dialed In Podcast: July 10th, 2026

A “three inch polisher” is a small dual-action (or rotary) polishing tool sized for tighter areas like door jambs, bumpers, and curved bodywork. Bosch is the tool brand, and the smaller pad size helps with control and reducing the chance of uneven polishing on complex surfaces.

“Touchless traceless” refers to a car-cleaning approach where the product is designed to clean without physical contact that could leave marks or scratches. It’s typically associated with detailing/cleaning chemicals used to reduce marring and residue.

Ozone machines generate ozone gas to deodorize and sanitize interiors. In detailing, they’re often used to reduce smells by breaking down odor-causing compounds.

Lake Country is a detailing brand known for polishing pads and related accessories used in paint correction and finishing. Here, it’s referenced via the pad-washing equipment used to maintain pad performance.

“Swiss tracks” likely refers to a Swiss-cheese-like pattern of paint/clearcoat contamination or a track-like layout of residue, where overspray or product fling can spread contamination across the garage or work area. In this context, it’s used to emphasize avoiding pad blowouts that scatter mess.

Chemical Guys is a detailing brand, and “citrus red” refers to a specific scented product variant. The host is using it as a reference point for how they plan to launch or formulate their own soap.

A 55-gallon drum is a large industrial container size commonly used for bulk chemicals and detailing products. The host is describing how the soap was sold in bulk packaging before being repackaged for retail.

A foam cannon is an attachment used with a pressure washer to apply thick, clinging soap foam to a car. It helps loosen dirt and reduces how much you have to physically scrub during washing.

A pressure washer is a high-pressure water sprayer used to rinse and pre-soak vehicles before washing. In detailing, its flow rate and pressure affect how well soap mixes and how much product you need.

“20 amp” is a higher electrical current rating than 15 amp, indicating the device can support more electrical load. That can enable higher performance settings for certain equipment.

“15 amp” refers to an electrical current rating used to describe how much power a device can draw or handle. In detailing or paint-related equipment, higher amp capability can correlate with higher output or faster operation.

“Gallons per minute” (GPM) is a flow-rate measurement that describes how much liquid the pump can move. Higher GPM generally means faster application and rinsing, assuming the rest of the system can keep up.

A “triple X type pump” is a specific high-output pump design used to move liquid at high flow rates. In this context, it’s being pitched as capable of multi-gallon-per-minute performance for detailing/chemical mixing or application.

“Blocked” likely refers to block sanding, where a sanding block is used to keep the surface flat and even. That helps prevent waves or uneven texture before paint layers go on.

Base coat is the first paint layer that provides the car’s color. It’s typically followed by clear coat to protect the color and add gloss.

Clear coat is the transparent protective top layer applied over base coat. It shields the paint from UV rays and minor abrasions and is what gives the deep, glossy finish.

The Honda S2000 is a lightweight, high-revving roadster known for its naturally aspirated engine and sharp, responsive handling. In this segment, the host is using it as an example of a car that’s “really great” aside from cosmetic issues like mold.

The BMW E92 M3 is a performance coupe from BMW’s M division, notable for its naturally aspirated V8 and driver-focused chassis. The host cites it as a “really great” example in the context of evaluating condition within a large collection.

The Honda Civic Type R is a performance hot hatch known for front-wheel-drive grip, a turbocharged engine, and track-oriented tuning. The host contrasts “the Civic not so great” with “the Type R is great,” using it to illustrate how the specific variant matters when judging a car’s quality.

The Porsche GT4 RS is a track-focused 911 variant built for high-performance driving, typically with more aggressive aero and chassis tuning than standard GT4 models. The host says it “needs” an exhaust, framing it as the last remaining modification before the car is considered complete.

The Porsche GT3 is a 911 variant designed around track performance, with a focus on driver feel, aerodynamics, and high-revving engine character. Here, the host mentions it “needs to get painted,” implying the car is otherwise already finished from a modification standpoint.

This phrase is shorthand for common wear-and-upgrade items: wheels, brake components, and tires. The host lists them as part of the “reach the end of the rainbow” modification plan, implying they’ve already addressed the major functional upgrades.

A radar detector is an electronic device that listens for police radar signals and alerts the driver. The host includes it among the items they’ve already done as part of their overall “finished” modification list.

Rock chips are small impacts from road debris that can chip the paint or clear coat, often creating tiny pits or exposed spots. The host uses them as an example of why their finished car may not feel “complete” if the damage count is high.

The BMW E46 is the 3 Series generation (late-1990s to early-2000s) that’s especially popular with enthusiasts for its driving feel and mod-friendly platform. The host contrasts their E46 experience with their other cars, saying it didn’t hold them back from spending too much.

A “museum piece” is an enthusiast term for a collector-grade car kept in near-original condition, often with extremely low mileage. The speaker contrasts that with their other cars and implies they’d sell and buy again when another low-mileage example appears.

“ADS Pro” appears to be a car-care product used as a coating on the speaker’s vehicles. In this context, they’re using it to keep the paint “slick,” and they pair it with drying aid after washing.

A “drying aid” is a car-care product used after washing to help water sheet off and reduce water spots while you dry. The speaker uses it every wash and says their coated cars stay “slick,” implying easier drying and better water behavior.

The Tesla Model S is an all-electric luxury sedan known for its long range and software-driven driving experience. In this segment, the host talks about how often they wash it and how different wash products affect how the car looks and how the exterior protection holds up.

A touchless wash is a car-wash method that uses high-pressure water and cleaning chemicals to remove dirt without physically scrubbing the paint. The host is comparing it to adding a small amount of manual “touch” to improve results and protect the car’s finish.

In detailing, “coatings” usually refers to protective layers applied to paint—such as ceramic or polymer sealants—that make the surface more hydrophobic and easier to clean. The host claims their coating lasts longer and stays from getting “crunchy” and contaminated, implying better chemical resistance and dirt release.

PPF (paint protection film) is a clear, durable film applied to high-impact areas of a car to protect against chips, scratches, and minor abrasions. The host is answering a listener question about PPF recommendations, specifically naming brands and installers.

S-Tac Dynashield is a brand of paint protection film. In this segment, it’s offered as an alternative if the preferred “Ultra Fit” option can’t be found.

Ubiquiti (often associated with the UniFi product line) is a brand of networking gear used for home Wi‑Fi setups. The host mentions having a “unify ubiquity” system when answering a listener’s question about their home Wi‑Fi solution.

“Caster exhaust” isn’t a widely standardized automotive term, so it likely refers to a specific exhaust setup or component name used by a particular shop, kit, or build. In the context of the conversation, it sounds like someone is trying to identify where that exhaust piece is located on the car or system.

“Running duels” appears to be a mis-transcription of “running duals,” which in exhaust talk usually means running a dual exhaust setup (two exhaust paths/mufflers). The key idea is whether that configuration is beneficial or risky for the build they’re discussing.

A “pressure switch” is a sensor that monitors system pressure and triggers an electrical response when pressure crosses a set threshold. In this conversation, they’re worried about whether a change to the fuel/boost/air system could stress or affect that switch.

Check valves are one-way valves that allow flow in one direction while preventing backflow. They’re commonly used in fuel, vacuum, or pressurized air systems to protect components like pressure switches and pumps from pressure spikes or reverse flow.

“Triplix pumps” refers to a specific pump model or product line (likely aftermarket) used in the system being discussed. The speaker is claiming these pumps are very robust (“stout”), implying they can handle the operating conditions without causing damage.

The Tesla Model Y is a compact electric SUV known for its practicality, modern tech, and strong real-world efficiency. It’s often discussed because it represents a mainstream entry point into electric ownership while still offering room for everyday use. In your podcast context, it’s brought up as one of the host’s vehicles and as part of a conversation about liking and living with EVs.

The Tesla Model 3 is an electric sedan known for its battery-electric powertrain and strong efficiency, making it a popular daily-driver EV. In enthusiast conversations, it often comes up as a baseline for comparing EV performance, charging experience, and ownership costs versus other EVs.

Leather ceramic coatings are protective products marketed to bond to leather upholstery and make it more resistant to staining and wear. The “ceramic” part usually refers to a silica- or ceramic-like chemistry that forms a thin protective layer, which the host argues could affect leather’s breathability by clogging pores.

“Nano thick” describes coatings marketed as extremely thin—on the nanometer scale—so they can provide protection without dramatically changing the surface. The host challenges that idea by arguing that even a very thin solid layer could still clog leather pores and reduce breathability.

Dye transfer is when color from clothing (like denim) migrates onto upholstery, leaving stains or discoloration. The host argues that this is the most practical risk to guard against with protective products, even if it’s relatively rare.

A leather conditioner is a product used to keep leather supple and reduce drying and cracking. In this segment, the host emphasizes choosing one that is not permanent and remains breathable so it doesn’t clog the leather’s pores.

“pH” is a measure of how acidic or basic a product is. The host is arguing for a leather cleaner with a specific pH so it cleans without damaging the leather surface or disrupting how it holds moisture and oils.

UV rejecting window tint is film applied to glass that blocks ultraviolet light, which helps reduce sun damage to interior materials. The host connects it to protecting leather from cracking and other long-term issues caused by UV exposure.

An air hose is the flexible line that carries compressed air from an air compressor to tools like pressure washers, blow guns, or pneumatic equipment. Hose length and internal diameter matter because they affect pressure drop and how well the tool performs at the far end.

“Max flow” refers to the maximum rate a compressor or air system can deliver, usually measured in gallons per minute (GPM) or similar flow units. When someone asks about max flow on a “victory unit,” they’re trying to confirm the system can supply enough air for the job without bogging down.

A 220-volt circuit is a higher-voltage electrical supply commonly used for larger shop equipment because it can deliver more power with lower current than a 120-volt circuit. The host is pointing out that many people may not be set up to run the required 220V/240V circuit.

“20 amp” describes the current capacity of an electrical circuit, which directly affects how much power a tool can draw safely. The host is contrasting 20A/240V setups with larger 30A options, implying that electrical service limits can be a real constraint for shop equipment.

In performance driving and vehicle-related training, “body weight” is often treated as a controllable variable that can affect fitness, endurance, and sometimes how a driver feels in a car. The host is personalizing it as a measurable goal (195 pounds) rather than discussing a vehicle spec.

An extension cord is a portable electrical cable used to reach power outlets that are farther away. In this segment, they’re discussing a specific “Prologue” extension-cord version and how to modify an existing cord by cutting and swapping the end.

“Active 3.0” is a named version of an “active” product they’re considering carrying. The host critiques it on design and build details (including the pump head and how fasteners are finished), even though it functions and sounds good.

“Max load EDM” appears to be a specific product variant or model name, likely indicating a maximum-load capability and an EDM-related design. The host says they prefer the max load EDM over “active 3.0,” implying it’s the better option for their needs.

The “pump head” is the part of a pump assembly that houses the core pumping mechanism and interfaces with the rest of the system. Here, the host says the pump head looks cheap and points to design flaws, implying build-quality and fit/finish matter to them.

“Zinc plated screws” are fasteners coated with zinc to improve corrosion resistance and durability. The host contrasts this with how such screws are typically mounted (more recessed in plastic), using the difference as evidence of perceived “jank” in the design.

“Janky” is enthusiast slang for something that feels unreliable, poorly engineered, or awkwardly assembled. In automotive contexts, it usually points to inconsistent behavior, loose tolerances, or hardware that doesn’t feel properly sorted.

“Fit and finish” describes how well a product’s parts line up (fit) and how cleanly it’s assembled and refined (finish). In cars, it’s often felt as panel alignment, surface quality, and how solid the controls and components feel.

The Chevrolet Camaro is a performance-focused American muscle car known for its styling and strong engine options. It’s often discussed in enthusiast conversations because it has a long history and a big aftermarket, making it a popular platform for modifications. In your podcast context, it’s mentioned as an attraction to the Camaro (and even older muscle-era cars), tying into the theme of personal car obsession.

“Fox body Mustang” refers to a specific era of the Ford Mustang (the Fox platform) that enthusiasts often treat as a distinct generation. The speaker uses it as a benchmark for how they can be drawn to cars from that same time period.

“B-Series engine” refers to Honda’s B-series family of inline-four engines, best known in enthusiast circles for their high-revving nature and aftermarket support. Different B-series variants (like the B16/B18 families) have different displacement and performance characteristics.

“Breathable leather” refers to leather upholstery treated or finished in a way that allows some moisture and air vapor to pass through, helping reduce the “sealed plastic” feel. The speaker contrasts this with a more impermeable leather coating.

The Land Rover Range Rover is a luxury SUV known for comfort, off-road capability, and advanced features. In the podcast context, it’s specifically referenced as a plug-in hybrid (Range Rover PHEV), which matters because it changes how you maintain and use the vehicle compared with a standard gasoline-only SUV. It’s brought up in a conversation about potential selling and choosing a different luxury performance car.

PHEV stands for “plug-in hybrid electric vehicle.” It uses both an internal-combustion engine and an electric motor/battery, and you can charge the battery from an external power source.

“991.1” is the first facelift generation of the Porsche 911 (the 991 generation’s early variant). It’s a popular sweet spot for buyers who want modern 911 usability and technology without going all the way to later revisions.

A “press-off sprayer” is a manual trigger/squeeze sprayer mechanism used on cleaning bottles. The speaker is troubleshooting a sprayer attachment that snaps on but doesn’t deliver a proper spray pattern.

Fender liners are the inner plastic or composite panels inside the wheel well that help protect the body from road spray, debris, and moisture. Coating them is discussed here as a way to improve durability or appearance, but the host says it depends on the material and whether the coating holds up.

The Ford Bronco is a modern off-road SUV platform known for its rugged, trail-capable design. The host mentions coating the Bronco’s fender liners, specifically calling out that they were carbon fiber, and then notes the coating didn’t hold up for them.

Armor Pro is a brand of protective coating used on automotive surfaces. In this segment, the host contrasts it with a “trim coat,” saying they’d use a body coating like Armor Pro on carbon-fiber fender liners to improve protection.

The Honda Civic is a long-running compact car line that’s especially popular in the enthusiast world because it’s easy to work on and has a huge aftermarket. In this segment, it’s referenced as the subject of frequent weekend polishing videos, implying regular cosmetic care.